2GIG GC3 - Learning The Basics Pt. 1

2GIG GC3 - Arm Away

Press ARM AWAY, touchscreen displays a countdown exit timer

Arm_Away_1.png Arm_Away_2.png

2GIG GC3 - Arm Stay

Press ARM STAY, touchscreen displays a countdown exit timer

Arm_Stay_1.png Arm_Stay_2.png

2GIG GC3 - Arm Instant

Press ENTRY DELAY Delay to move the switch to the left then press ARM AWAY or ARM STAY

GC3_Arm_Instant_01.png GC3_Arm_Instant_02.png

2. Touchscreen displays a countdown timer during exit delay

GC3_Arm_Instant_03.png GC3_Arm_Away_3.png

2GIG GC3 - Arm Partitions

Partitions are areas within the system that can be armed or disarmed without affecting other areas

Note: This option is not available on GC3 systems with older firmware

1. Press SMART AREAS then enter the Master Code

GC3_Partition_Arm_01_Main.png GC3_Partition_Arm_02_Enter_Code.png

2. Press ARM STAY or ARM AWAY icon by partition to arm

GC3_Partition_Arm_03_Smart_Areas.png GC3_Partition_Arm_04_Arm_Away.png

2GIG GC3 - Disarming

If entering the premises during entry delay enter your User Code

GC3_Disarm_02_Enter_Code.png GC3_Disarm_03_Disarmed.png

If at home armed in Stay mode press Disarm then enter your User Code

GC3_Disarm_01_Disarmed_while_Armed.png  GC3_Disarm_02_Enter_Code.png

2GIG GC3 - Disarm Partitions

Partitions are areas within the system that can be armed or disarmed without affecting other areas

Note: This option is not available on GC3 systems with older firmware

1. Press SMART AREAS then enter the Master or an Authorized User Code

Partition_Disarm_01_Main.png Partition_Disarm_02_Enter_Code.png

2. Press DISARM buttons by partition to disarm

Partition_Disarm_03_Smart_Areas.png Partition_Disarm_04_Main.png

2GIG GC3 - Force Bypassing Sensors

1. Open door or window then press BYPASS ALL

GC3_Force_Bypass_4_Door_Open.jpg GC3_Force_Bypass_1_Back_Door_Open.png

2. Enter User Code to confirm, bypass appears as a numbered circle over Arm Stay and Arm Away buttons

GC3_Force_Bypass_2_Enter_Code.png GC3_Force_Bypass_3_Ready_To_Arm_with_Bypassed_Sensor.png

3. Press ARM STAY or ARM AWAY

GC3_Arm_Stay_or_Away.png GC3_Generic_Arm_Countdown.png

2GIG GC3 - Bypassing Sensors

1. Press SYSTEM SETTINGS then enter the Master Code

GC3_Bypass_1_Ready_To_Arm.png GC3_Bypass_2_Enter_Code.png

2. Press BYPASS SENSORS then move switch to the right to bypass

GC3_Bypass_3_Main_Menu.png GC3_Bypass_4_Bypass_Menu.png

3. Press GC3_Back_Arrow.png twice or the HOME button to exit

GC3_Bypass_6_Bypass_Exit.png GC3_Bypass_5_Main_Menu_Again.png GC3_Home_Button_2.jpg

4. Press ARM STAY or ARM AWAY

GC3_Arm_Stay_or_Away.png GC3_Generic_Arm_Countdown.png

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.