2GIG GC3 - Learning The Basics

Set Time And Date

1. Press SYSTEM SETTINGS then enter Master Code

GC3_Time_Date_01_Ready_to_Arm.jpg GC3_Time_Date_02_Enter_Code.jpg

2. Press DATE/TIME then move Set Date sliders up or down to set

GC3_Time_Date_03_System_Settings.jpg GC3_Time_Date_04_Set_Date.jpg

3. Move Set Time sliders up or down then press CHECK to save and HOME button to exit


Severe Weather Alerts

Severe weather alerts are issued by the National Weather Service as an incoming message

To remove alert press DELETE then press YES, DELETE THIS MESSAGE

GC3_Severe_Weather_Alert_01.png GC3_Severe_Weather_Alert_02.png

Press GC3_Back_Arrow.png or the HOME button to exit

GC3_Severe_Weather_Alert_03.png GC3_Home_Button_2.jpg

Using Bookmarks

A Bookmark can navigate to a frequently used screen after 20 seconds of no activity

At any screen hold top Bookmark icon then press OK, a star appears on the bookmark icon

GC3_Bookmark_1_Add_Bookmark.png GC3_Bookmark_2_Confirmation.png

To clear Bookmark hold the Bookmark icon at the top of the primary screen then press OK to confirm

GC3_Bookmark_3_Bookmark_Enabled.png GC3_Bookmark_4_Bookmark_Clear.png

Volume Control and Door Chimes

1. Press SYSTEM SETTINGS then enter your Master Code

Enter_Program_01_Ready_To_Arm.png Voice_Chime_02_Enter_Code.png

2. Press SOUNDS then move sliders to adjust volume then press backwards_triangle.JPGor the HOME button to exit

GC3_Sounds_01.png GC3_Sounds_02.png 

Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.