2GIG GC3 - Learning The Basics Pt. 3

2GIG GC3 - Set Time And Date

1. Press SYSTEM SETTINGS then enter your Master Code

GC3_Time_Date_01_Ready_to_Arm.jpg GC3_Time_Date_02_Enter_Code.jpg

2. Press DATE/TIME then move sliders up and down to set the Date

GC3_Time_Date_03_System_Settings.jpg GC3_Time_Date_04_Set_Date.jpg

3. Move sliders up or down to set the Time then press CHECK icon or the HOME button to exit

GC3_Time_Date_05_Set_Time.jpgGC3_Home_Button_2.jpg

2GIG GC3 - Severe Weather Alerts

When a severe weather report is issued by the National Weather Service the GC3 sounds loud beeps and displays the alert as an incoming message

To remove alert press DELETE then press YES, DELETE THIS MESSAGE

GC3_Severe_Weather_Alert_01.png GC3_Severe_Weather_Alert_02.png

Press GC3_Back_Arrow.png or the HOME button to exit

GC3_Severe_Weather_Alert_03.png GC3_Home_Button_2.jpg

2GIG GC3 - Using Bookmarks

If you frequently navigate to a particular screen (such as thermostats), you can bookmark it which will make it the default home screen. This will display after 20 seconds of no activity

The 2GIG GC3 lets you bookmark one screen

At any screen hold top Bookmark icon then press OK, a star appears on the bookmark icon

GC3_Bookmark_1_Add_Bookmark.png GC3_Bookmark_2_Confirmation.png

To clear a bookmark hold the Bookmark icon at the top of the primary display screen then press OK to confirm

GC3_Bookmark_3_Bookmark_Enabled.png GC3_Bookmark_4_Bookmark_Clear.png

2GIG GC3 - Volume Control and Door Chimes

1. Press SYSTEM SETTINGS then enter your Master Code

Enter_Program_01_Ready_To_Arm.png Voice_Chime_02_Enter_Code.png

2. Press SOUNDS then move sliders to adjust volume then press backwards_triangle.JPGor the HOME button to exit

GC3_Sounds_01.png GC3_Sounds_02.png GC3_Home_Button_2.jpg 

 

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.