Qolsys IQ Panel 2 - Home Automation Programming (See All)

Add Z-Wave Light Module

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Z-Wave_01_Installer_Menu.jpg Z-Wave_02_Devices.jpg

4. Press ADD DEVICE then PAIR

Z-Wave_Add_00_Main.jpg Z-Wave_Add_01_Main.jpg

5. Press the MATE button on the light module

Z-Wave_Add_02_Searching.jpg Z-Wave_Mate_Button_2.jpg

6. IQ Panel 2 should beep if successful, press AUTOMATION then select if device turns on at Night or Evening then press OK

Z-Wave_Add_04_Automation_1.jpg Z-Wave_Add_04_Automation_2.jpg

7. Press NAME then select pre-determined name or press CUSTOM DESCRIPTION to create a name

Z-Wave_Add_05_Name.jpg Z-Wave_Add_06_Custom_Name_01.jpg

8. If Custom Descriptor was selected enter Custom Name then press CHECK or KEYPAD icon

Z-Wave_Add_07_Custom_Name_02.jpg

9. Press BACK ARROW or HOME to exit

Z-Wave_Add_09_Exit.jpg

Delete Z-Wave Light Module

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Z-Wave_01_Installer_Menu.jpg Z-Wave_02_Devices.jpg

4. Press CLEAR DEVICE

Z-Wave_Delete_01.jpg Z-Wave_Delete_02_Clear.jpg

5. Press the MATE button on the light module

 Z-Wave_Mate_Button_2.jpg

6. If successful press OK then BACK ARROW or the HOME button to exit

Z-Wave_Delete_03.jpg Z-Wave_Delete_04.jpg

Programming A Z-Wave Door Lock

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Z-Wave_01_Installer_Menu.jpg Z-Wave_02_Devices.jpg

4. Press ADD DEVICE then PAIR

Z-Wave_Add_00_Main.jpg Z-Wave_Add_01_Main.jpg

5. Remove the battery cover from the Kwikset lock and press the LEFT button

Z-Wave_Add_02_Searching.jpg 

Schlage Deadbolt

1. Enter the six-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute

hero_01.png

Kwikset Deadbolt

Open the battery cover and press the left button then wait for 2 minutes

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt

1. Touch the screen with the back of your hand or fingers to activate

2. Enter the 4 to 8 digit Master PIN code then press #, lock should sound a "Happy" tone

3. Press 7 then # to enroll, lock should sound a "Happy" tone

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

6. If successful lock settings appear, press NAME and select from pre-determined names or press CUSTOM NAME to enter your own name

Z-Wave_Kwikset_Lock_Add_02_Learned.jpg Z-Wave_Kwikset_Lock_Add_03_Name.jpg

7. If CUSTOM NAME was selected press CUSTOM DESC then enter name then press CHECK or KEYPAD icon then press ADD to save

Z-Wave_Kwikset_Lock_Add_04_Custom_Name.jpg Z-Wave_Kwikset_Lock_Add_04_Custom_Name.jpg 

8. Press ADD to finish then press BACK ARROW or HOME button to exit

Z-Wave_Kwikset_Lock_Add_05_Add.jpg Z-Wave_Thermostat_Add_09_Exit.jpg

Programming a CT100 Thermostat

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Z-Wave_01_Installer_Menu.jpg Z-Wave_02_Devices.jpg

4. Press ADD DEVICE then PAIR

Z-Wave_Add_00_Main.jpg Z-Wave_Add_01_Main.jpg

5. At the thermostat press the MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg

6. Press MATE again, MATE begins flashing

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

7. If successful the thermostat displays LINK under antenna icon, press the MENU button to exit

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

8. The IQ Panel 2 beeps and displays device settings, press NAME then select pre-determined name or press CUSTOM NAME to create your own name

Z-Wave_Thermostat_Add_03_Learned.jpg Z-Wave_Thermostat_Add_05_Name.jpg 

9. If Custom Descriptor was selected press CUSTOM DESC and enter Custom Name then press CHECK or KEYPAD icon

Z-Wave_Thermostat_Add_06_Custom_Name_01.jpg Z-Wave_Thermostat_Add_07_Custom_Name_02.jpg

10. Press BACK ARROW or HOME to exit

Z-Wave_Thermostat_Add_09_Exit.jpg

Adding Z-Wave Devices

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Z-Wave_01_Installer_Menu.jpg Z-Wave_02_Devices.jpg

4. Press ADD DEVICE then PAIR or INCLUDE

Z-Wave_Add_00_Main.jpg Z-Wave_Add_01_Main.jpg

5. Press the LEARN or PAIR button on the device

Z-Wave_Add_02_Searching.jpg

Plug-in Lamp or Light/Appliance Module

Z-Wave_Mate_Button_2.jpg

 

Double click the Mate button

IQ Siren

Press the button at the bottom of the siren.

IQ_Siren_Learn_Button.jpg

In-Wall Dimmer or On/Off Light Switch

Turn the light switch on and off

Picture4.png

In-Wall Outlet

Double click the button in the middle of the outlet.

final_nueve.jpg

 

 

 

Thermostats

GE Basic Thermostat

Remove top cover then press the MATE button

Radio_Thermostat_CT20.jpg

Radio Thermostat CT30, CT100 and CT101

1. Press the thermostat MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg

2. Press MATE button again, MATE begins flashing

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

3. If successful the thermostat displays LINK under antenna icon, press the MENU button to exit

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

Trane Remote Energy Management Thermostat

Press the LEFT button twice then scroll down to Z-WAVE INSTALL and press SELECT then YES

final_2.jpg      final_cuatro.jpg

6. IQ Panel 2 should beep if successful, Press NAME then select pre-determined name or press CUSTOM DESCRIPTION to create a name

Z-Wave_Add_05_Name.jpg Z-Wave_Add_06_Custom_Name_01.jpg

7. If Custom Descriptor was selected enter Custom Name then press CHECK or KEYPAD icon

Z-Wave_Add_07_Custom_Name_02.jpg

8. Press BACK ARROW or HOME to exit

Z-Wave_Add_09_Exit.jpg

Qolsys IQ Panel 2 - LiftMaster Garage Door Installation

Step 1: Install the 888LM MyQ Control Panel

LiftMaster_888LM_Control_Panel.jpg

1) Disconnect all electrical power to the garage door opener
2) Remove the existing door control from the wall
3) Note the polarity of the wires connected to the existing door control. Label the wires appropriately (Red/White)
4) Disconnect the wires from the existing door control
5) Connect the wires to the new MyQ Control Panel
6) Mount the MyQ Control Panel to the wall
7) Reconnect power, the yellow command LED  and the red learn LED quickly blink for up to 5 minutes as the MyQ Control Panel recharges

8. The yellow command LED  and the red learn LED quickly blink for up to 5 minutes as the MyQ Control Panel recharges
9) Test the MyQ Control Panel. Press the push bar to activate the garage door opener
10) Connect to LiftMaster Internet Gateway (See instructions below)

Step 2: Connect LiftMaster Internet Gateway

LiftMaster_Retrofit_01.jpg

1) Connect ethernet cable to router and the internet gateway
2) Connect power to the internet gateway
3) When the internet gateway connects to the internet, the green light will stop blinking and will light solid. If the green
light does not light solid, check the power, router, and internet connections to the internet gateway
4) Write down the serial number on the gateway to be used in the registration process

Step 3: Register Internet Gateway

**Please note: You cannot register the Internet Gateway through your 
Online Account if it is already registered through MyQ/LiftMaster.
You must delete the Internet Gateway from your MyQ account
before attempting to register it to your LiveWatch Interactive account .**

1) Log into your account by using your customer credentials.
2) Access garage door registration through emPower -> Garage.
3) Follow the instructions to add a gateway.
4) Enter the serial number of the Gateway and continue
5) Select Add New Device to put the Gateway into learn mode.
6) Perform either of the two scenarios listed below:

--Scenario #1: After the yellow light is on at the internet
gateway, go to the MyQ Control Panel (888LM) and push the
learn button twice. The LED on the gateway will turn blue
once the device is learned in.

--Scenario #2: After the yellow light is on at the internet
gateway, enter menu > program > MyQ device on the
Control Panel (e.g. 880LM). The LED on the gateway will turn
blue once the device is learned in.

8) Return to the Garage page and click “Check for New Devices”.
9) Repeat steps 6-8 if initially unsuccessful. Also check the
model number of your garage door against the complete list
of compatible garage door openers, linked below, and make sure the
garage door is compatible. (See list of compatible garage door openers)

LiftMaster MyQ Garage Door Programming

Identifying the Components:

The 888LM is the Control Panel mounted on a wall usually by the inside garage door

 garage_dv.png

The Gateway links the MyQ Garage Door opener to the Internet Router by WiFi

LM2.png

Compatibility:

Any LiftMaster or Chamberlain garage door opener with integrated MyQ technology

There are two types of protocol compatible with the gateway:  

A. Security + 

B. Security + 2.0

 "Security +"

If the MyQ logo is not on the opener there should to be a purple learn button, You will have to use the LiftMaster control panel in this case.

lm_indi.png

  

"Security + 2.0"

There will be a control panel included with the opener. This control panel will have a "Learn" button

 

LM4.jpg

Connecting the Control Panel to the Garage Opener:

1)  Connect the red and white wires to the control panel                                                                              LM5.jpg

2) Wait till the "Control Panel" finishes charging.  You'll when it's done, the "Yellow LED" will remain illuminated. The door can be tested by simply pressing the push button at the center.

 Note: Control panel's used with Security + 2.0 garage door openers do not have to charge.

Setting Up the Gateway Device through Alarm.com:

 

1) Connect Gateway to router by Ethernet cable, then power and wait until the Green LED turns on ON solid

LiftMaster_Retrofit_01.jpg

2) Add the Gateway into Alarm.com by selecting "Get Started!"

Picture1.png

 

3) Enter the Gateway serial number and the account will attempt to connect with the device

Picture2.png

Learning Control Panel(s) to the Gateway Device:

1) Enable “Learn Mode” on the gateway. This will cause the yellow LED on the gateway to turn on

  picture_3.jpg

 2) Press the LEARN button on the control panel. When this connects to the Gateway the blue LED on the Gateway turns ON

LM91.jpg

LiftMaster Compatible Garage Door Openers

Drive 1997-2004 1997-2004 2005-2006 2007-present
Chain  1240R      
Chain  1245R   1345  
Chain/DS 1246R (DS)   1346 (DS)  
Chain  1255R   1355  
Chain/DS 1256R (DS)   1356 (DS)  
Chain    2245 3245  
Chain  1265 2255 3255  
Chain    2265 3265  
Chain    2565    
Chain ATS211R ATS211X ATS2113X  
Chain    2575 3575  
Chain/DS   2595 (DS) 3595 (DS) 3895T
Belt    2280 3280  
Belt    2585 3585 3885T
24VDC Belt 2500(B) 2500D 3500  
12VDC Unit     3850 3850T
RJO - 24VDC      3800 3800T
Screw  1000SDR 2110 3110 3240
Screw  2000SDR 2220 3220 3130

 

Drive 1997-2004 2004 2004 2007-present
Chn/Cble 1200      
Chn/Cble CG40 CG40S CG40D HD200D
Chn/Cble 2200 CG42CS CG42D HD200DM
Chn/Cble PD100 7520S 7520D HD400D
Chn/Cble PD200 / PD210 PD210CS   HD400DM
Chn/Cble PD600 / PD212 PD212C   248730
Chn/Cble 4200   PD210D 248735
Chn/Cble 6200   PD212D  
Chn/Cble PD610 PD610S PD610D  
Chn/Cble PD612K PD612S    
Chn/Cble 7220 / 7320   PD612D  
Chn/Cble 7420 PD752S PD752D  
Chn/Cble   PD758S PD758D  
Belt 8200   WD822D HD600D
Belt 9200 / 9500   WD922D 248739
Belt WD822K WD822S WD832D  
Belt WD922K WD922S    
Belt WD912K WD912KS    
24VDC Belt   WD952S WD952D 248754
12VDC Unit     WD962D HD900D
Screw 4620 / 4650DI PD420 PD420/422D 995XDM
Screw 4640 / PD460 7902 PD462D 9950D
Screw 9902 / PD420 9950/9960 9950D  

 

  1997 - 2005 1997 - 2005 2005+
Chain Drive Sec+ - 390M hz Sec+ - 390M hz Sec+ - 315M hz
Units 139.18050.    
  139.18051    
  139.18052    
  139.18053    
  139.18057    
  139.18058    
  139.18059    
  139.18060.    
  139.18063    
  139.18070.    
  139.18076    
  139.18086    
  139.18096 139.18978  
  139.18450.   139.18450D
  139.18451   139.18451D
  139.18452   139.18452D
  139.18453   139.18453D
  139.18458   139.18458D
  139.18470.   139.18470D
  139.18473   139.18473D
  139.18475    
  139.18525    
  139.18555   139.18555D
  139.18595    
DC Units 139.18400.    
Belt Drive 139.18479 139.18887  
Units 139.18489 139.18897 139.18489D
  139.18585 139.18979 139.18585D
  139.18679 139.18987  
  139.18687    

 

  1997 - 2005 2005+
Chain/Cable Sec+ - 390M hz Sec+ - 315M hz
Drive 139.53661 139.53648D
Units 139.53662  
  139.53670  
  139.53671  
  139.53672  
  139.53673  
  139.53674  
  139.53675  
  139.53677  
  139.53910  139.53910D
  139.53959srt  
  139.53961  
  139.53962  
  139.53966  
  139.53974  
  139.53975  
  139.53976  
  139.53977srt  
  139.53978  
  139.53982  
  139.53985 139.53985D
  139.5398511  
  139.53989  
  139.53990 139.53990D
  139.5399011  
  139.53995  
    139.53997D
Screw Drive 139.53663  
Units 139.53927  
  139.53963  
  139.53965srt  
  139.53991  
  139.53992 139.53992D
  139.5399211  
    139.53930D
Screw Drive 139.53924  
Belt Drive 139.53664  
Units 139.53914 139.53914D
  139.53954  
  139.53964  
  139.53984srt  
DC Units   139.53918D
  139.53919 139.53919D

 

 

 

 

 

 

 

 

 

 

 

 

 




Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.