Interlogix Concord - Home Automation Programming (See All)

Add Z-Wave Thermostat

This requires an Alarm.com communication module

1. Hold Z-Wave button on cellular daughter-board until L2 LED flashes a 4-blink pattern

Z-Wave_Learn.jpg

2. Enter Z-Wave learn mode on the thermostat

Radio Thermostat CT30/CT100/CT101

1. Press MENU button then press the MATE icon below radio icon, "r1" appears

Radio_Thermostat_CT100.jpg

 

2. Press MATE icon again, MATE flashes, if learning is successful "LINK" appears below radio icon, press MENU to exit

  

Radio Thermostat CT110

Press button on right side

Radio_Thermostat_CT110.jpg

RCS TBZ48 Thermostat

TBZ48_Thermostat_Learn_7.jpg

1. Hold FAN button for 5 seconds until "SETUP" appears

TBZ48_Thermostat_Learn_1.jpg TBZ48_Thermostat_Learn_2.jpg

2. Press UP ARROW button until "ZWAVE" then press MODE button

TBZ48_Thermostat_Learn_3.jpg TBZ48_Thermostat_Learn_4.jpg

3. Press MODE button again to learn then press FAN button to exit

TBZ48_Thermostat_Learn_5.jpg TBZ48_Thermostat_Learn_6.jpg

3. If successful Concord keypad beeps and L2 LED turns ON for 1 minute

Delete Z-Wave Light Module

This requires an Alarm.com communication module

1. Hold Z-Wave button on cellular daughter-board until L2 LED flashes a 4-blink pattern

Z-Wave_Learn.jpg

2. Hold Z-Wave button again until L@ LED flashes a 2-blink pattern then press the light module mate button

Z-Wave_Mate_Button.jpg

3. If successful Concord keypad beeps and L2 LED turns ON for 1 minute

Add Z-Wave Light Module

This requires an Alarm.com communication module

1. Hold Z-Wave button on cellular daughter-board until L2 LED flashes 4-blink pattern

Z-Wave_Learn.jpg

2. Press the light module mate button

3. If successful Concord keypad beeps and L2 LED turns ON for 1 minute 

 

 

 

 

 

 

 

 

 

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.