2GIG GC3 - Home Automation Programming (See All)

Control Lighting

1. Press SMART HOME CONTROLS then LIGHTS

GC3_Thermostat_01.png GC3_Lights_01_Main_Menu.png

2. Move sliders or ON/OFF switch to control lights

GC3_Lights_02_Light_Control.pngGC3_Lights_03_Light_Bulb.jpg

3. Press backwards_triangle.JPGor HOME button to exit

GC3_Lights_04_Exit.png GC3_Thermostat_04_Exit.png GC3_Home_Button_2.jpg

Controlling Door Locks

1. Press SMART HOME CONTROLS then LIGHTS

GC3_Thermostat_01.png GC3_Lock_01_Main_Menu.png

2. Move sliders to lock or unlock door then press backwards_triangle.JPGto exit

GC3_Lock_02_Lock.png GC3_Lock_03_Exit.png

3. Press backwards_triangle.JPGagain or the HOME button to exit

GC3_Thermostat_04_Exit.pngGC3_Home_Button_2.jpg 

Control Thermostats

1. Press SMART HOME CONTROLS then THERMOSTATS

GC3_Thermostat_01.png GC3_Thermostat_02_Main_Menu.png

2. Press arrow keys to control FAN and to adjust the temperature then press backwards_triangle.JPGor HOME button to exit

GC3_Thermostat_03_Thermostats.png GC3_Thermostat_04_Exit.png

GC3_Home_Button_2.jpg 

Add Z-Wave Light Module

1. Press SYSTEM SETTINGS then enter the Installer Code 1561

GC3_System_Settings_01_Ready_To_Arm.png GC3_System_Settings_02_Enter_Code.png

2. Press SMART HOME SETTINGS then ADD DEVICES

GC3_System_Settings_03_Smarthome_Select.png GC3_System_Settings_04_Smarthome_Main.png

3. Press the Mate or Learn button on the device

GC3_System_Settings_05_Add_Devices.png Z-Wave_Mate_Button.jpg

4. Once the light module is added press OK

GC3_System_Settings_06_Device_Detected.pngGC3_System_Settings_07_Device_Added.png

5. Press RENAME then enter new device name then press DONE

GC3_System_Settings_08_Show_Device.pngGC3_System_Settings_09_Rename.png

6. Press GC3_Back_Arrow.png  or the HOME button to exit

GC3_System_Settings_10_Exit.png GC3_Home_Button_2.jpg

Add CT30, CT100, CT101 Thermostat

1. Press SYSTEM SETTINGS then enter the Installer Code 1561

GC3_System_Settings_01_Ready_To_Arm.png GC3_System_Settings_02_Enter_Code.png

2. Press SMART HOME SETTINGS then press ADD DEVICES

GC3_System_Settings_03_Smarthome_Select.png GC3_System_Settings_04_Smarthome_Main.png

3. The 2GIG GC3 enters learn mode, at the thermostat press the MENU button

GC3_System_Settings_05_Add_Devices.png Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg

4. "r1" displays and MATE appears under antenna icon, press MATE twice, MATE begins flashing

Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

5. If successful the 2GIG GC3 displays "Adding Device" and the thermostat displays LINK under antenna icon, press the MENU button to exit

GC3_System_Settings_06_Device_Detected.png Radio_Thermostat_CT100_Learn_04_Linked.jpg 

6. On the 2GIG GC3 press RENAME then enter a new thermostat name

Radio_Thermostat_CT100_Learn_05_2GIG_Learned.png Radio_Thermostat_CT100_Learn_06_2GIG_Rename.png

7. Press GC3_Back_Arrow.png or the HOME button to exit

Radio_Thermostat_CT100_Learn_07_2GIG_Exit.png GC3_Home_Button_2.jpg

Delete Failed Z-Wave Devices

In the event a Smart Home Z-Wave automation device has failed or is lost

1. Press SYSTEM SETTINGS then enter the Installer Code 1561

GC3_Delete_Device_01_Ready_To_Arm.png GC3_Delete_Device_02_Enter_Code.png

2. Press SMART HOME SETTINGS then press VIEW ALL DEVICES

GC3_Delete_Device_03_Smarthome_Select.png GC3_Delete_Device_04_Smarthome_Main.png

3. Press 3 BARS icon by failed device then press REMOVE

GC3_Delete_Device_05_List_Devices.png GC3_Delete_Device_06_Devices_Settings.png

4. Press REMOVE to confirm then OK when deleted

GC3_Delete_Device_07_Delete_Confirm.png GC3_Delete_Device_09_Removed.png

5. Press GC3_Back_Arrow.png or the HOME button to exit

GC3_Delete_Device_08_Exit.pngGC3_Home_Button_2.jpg

Remove Z-Wave Light Module

If the light module is still active follow these steps, if the light module has failed or is lost go here Remove Failed Smart Home Device

1. Press SYSTEM SETTINGS then enter the Installer Code 1561

GC3_Delete_Device_01_Ready_To_Arm.png GC3_Delete_Device_02_Enter_Code.png

2. Press SMART HOME SETTINGS then press REMOVE DEVICES

GC3_Delete_Device_03_Smarthome_Select.png GC3_Remove_Device_00_Smarthome_Main.png

3. 2GIG GC3 enters Z-Wave delete mode, press MATE or LEARN button on lamp module

GC3_Remove_Device_01_Remove_Device.png Z-Wave_Mate_Button.jpg

4. Press OK when finished then press GC3_Back_Arrow.png or the HOME button to exit

GC3_Delete_Device_09_Removed.png  GC3_Remove_Device_02_Device_Removed.pngGC3_Home_Button_2.jpg

Control Garage Door Openers

1. Press SMART HOME CONTROLS then press GARAGE DOORS

1_Ready_To_Arm.png Garage_Door_01_Main.png

2. Move slider left to open or right to close then press  or HOME button to exit

Garage_Door_02_Closed.png

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.