GE Simon 3 - Learning the basics (See All)

Check Status

The status button turns ON if the sensor is open or trouble exists, press to hear

Simon_3_Status.jpg

Using The Panic Buttons

Hold bottom fire, police and emergency panic button

Simon_3_Panics.jpg

Sub-Disarming

Sub-Disarming disarms sensitive areas like gun cabinets etc while the rest of the system is disarmed

Press DISARM while disarmed, button flashes and Simon 3 says "Sub Disarmed", press DISARM to exit

Simon_3_Sub_Disarm.jpg

Disarming

Enter User Code or press DISARM then enter User Code, Simon 3 sounds 1 beep

Simon_3_Disarm.jpg

Arming In Instant Mode

Arming Instant arms all exterior sensors without entry delay and bypasses interior sensors

1. Press the DOORS & WINDOWS button twice, button turns ON

2. The panel says "Doors and windows on, no delay

Simon_3_Arm_Instant.jpg

Arming In Stay Mode

Arming Stay arms all exterior sensors and bypasses interior motion detectors

1. Press the DOORS & WINDOWS buttons, Button turn ON

2. The panel says "Doors and windows on

Simon_3_Arm_Stay.jpg

Arming In Away Mode

Arming Away arms all interior and exterior sensors

1. Press the DOORS & WINDOWS then MOTIONS buttons. both buttons turn ON

2. The panel says "Doors and windows on, motions on

Simon_3_Arm_Away.jpg 

Door Chimes

1. Press CHIME DOORS button, the Chime button turns ON if enabled and OFF if disabled

2. Panel says "Chime On" or "Chime Off"

Simon_3_Chime.jpg

Clearing Alarm Memory and Troubles

1. Trouble and alarm memory turns the SYSTEM STATUS light ON, press to hear

Simon_3_Status.jpg

2. Panel speaks time and troubles or open sensors, press DISARM to clear alarms or troubles

Simon_3_Disarm.jpg

Controlling Remotely

If enabled you can control your Simon 3 through a regular telephone
 
1. Call your home phone and let it ring once
2. Hang up and wait 10 Seconds
3. Call your home phone again, Simon 3 answers phone but says nothing, press *
4. Enter your Master code
5. Enter the commands below
  • Press * + Master Code + # + 1 for System Status
  • Press * + Master Code + 0 to Toggle Lights ON or OFF
  • Press * + Master Code + 1 to Disarm
  • Press * + Master Code + 2 to Arm Doors and Windows
  • Press * + Master Code + 2 + 2 to Arm Doors/Windows No Entry Delay
  • Press * + Master Code + 2 + 3 to Arm Doors/Windows and Motions
  • Press * + Master Code + 2 + 2 + 3 + 3 to Arm Doors/Windows and Motions with Latchkey
  • Press * + Master Code + 3 to Arm Motions only
  • Press * + Master Code + 3 + 3 to Arm Motions with Latchkey
  • Press * + Master Code + 5 to 2-Way Talk, 0 or 1 Talks, 3 or 6 Listens, 99 Hangs up
  • Press * + Master Code + 9 to Hang up

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.