Simon XTi - User Functions

Arm Away

Arms all sensors

1. Press LOCK icon for the arming screen then press ARM ALL button

Arm_01_Main.jpg Arm_02_Away.jpg

2. Timer appears while arming

Arm_04_Arming.jpg Simon_XT_Armed.jpg

Arm Stay Instant

Arms exterior doors and windows with no entry delay, bypasses interior motion detectors

1. Press LOCK icon then press OFF by Entry Delay then press DOORS & WINDOWS ONLY

Arm_01_Main.jpg Arm_05_Instant_Arm.jpg

2. Countdown timer displays while arming

Arm_04_Arming.jpg

Arm Away Silent

Turns off exit delay beeps after arming away

1. Press LOCK icon then press ON button by Silent Exit then press ARM ALL to arm Away

Arm_01_Main.jpg Arm_Silent_Exit.jpg

2. Exit delay timer appears while arming

Arm_04_Arming.jpg

 

Arm Stay

Arms only exterior door and window sensors and bypasses interior motion detectors

1. Press the GEAR icon at the bottom right then press DOORS & WINDOWS ONLY

Arm_01_Main.jpg Arm_03_Stay.jpg

2. Countdown timer appears while arming

Arm_04_Arming.jpg Simon_XT_Armed.jpg

Disarm

Turns off the system

If Armed STAY press the LOCK icon then enter your User Code

Disarm_01.jpg Disarm_02.jpg

If Armed Away and entering premise enter your User Code

Disarm_02.jpg Main_Screen.jpg

Silence and Reset Alarm

1. Press Red Alarm Banner then enter your User Code to disarm and silence alarm

Silence_Alarm_01.jpg Disarm_02.jpg

2. Press bottom right GEAR icon then press HEAR button by Panel Status to hear alarm

Silence_Alarm_03.jpg Silence_Alarm_04.jpg

3. Press CLEAR then press CLOSE to exit

Silence_Alarm_05.jpg Silence_Alarm_06.jpg

Bypass Sensors

Force Bypassing - Automatic bypass of open sensors while arming

1. Open doors or windows to bypass then press the LOCK icon

Bypass_4_Door_Open.jpg Bypass_01.jpg

2. Press ARM ALL to arm, protest beeps sound, open sensors display, press BYPASS

Arm_02_Away.jpg Bypass_02.jpg

3. Simon XTi arms normally

Arm_04_Arming.jpg Simon_XT_Armed.jpg

Direct Bypassing - Manual bypass of sensors

1. Press bottom right GEAR icon then press SELECT button by Direct Bypass

Enter_Programming_01_Main.jpg Bypass_Direct_01.jpg

2. Press NOT BYPASSED button by sensors to change to BYPASSED then press CLOSE

Bypass_Direct_02.jpg Bypass_Direct_03.jpg

3. Press CLOSE again to exit

Bypass_Direct_04.jpg Main_Screen.jpg

4. Press LOCK icon then press DOORS and WINDOWS ONLY or ARM ALL to arm

Bypass_01.jpg Arm_Stay_or_Away.jpg

Change The Master Code

1. Click on GEAR icon at the bottom right then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter your Master Code then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press ACCESS CODES then press Master Code

Access_Codes_00.jpg Change_Master_Code_01.jpg

4. Enter new Master Code then press SAVE then CLOSE to exit

Change_Master_Code_02_Edit_Code.jpg Change_Master_Code_03_Exit.jpg

5. Press CLOSE again to exit programming

Exit_Programming_01_Exit.jpg Main_Screen.jpg

 

Add User Code

1. Click on the GEAR icon at the bottom right then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter your Master Code then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press ACCESS CODES then press box by an empty User Code

Access_Codes_00.jpg Add_Code_01.jpg

4. Enter new User Code then press SAVE then CLOSE to exit

Add_Code_02.jpg Add_Code_03.jpg

5. Press CLOSE again to exit programming

Exit_Programming_01_Exit.jpg Main_Screen.jpg

Delete User Codes

1. Click on the GEAR icon at the bottom right then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter your Master Code then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press ACCESS CODES then press to select User Code to delete

Access_Codes_00.jpg Delete_Code_01.jpg

4. Press DELETE then press SAVE to exit

Delete_Code_02.jpg Delete_Code_03.jpg

5. Press CLOSE several times to exit

Delete_Code_04.jpg Exit_Programming_01_Exit.jpg

Door Chimes

Sounds tone and speaks when door or window sensor is opened

1. Press the bottom right GEAR icon press the Chime ON to enable or OFF to disable

Enter_Programming_01_Main.jpg Chime_01.jpg

2. Press CLOSE to exit

Chime_02.jpg Main_Screen.jpg

Severe Weather Alerts

When Server Weather Alerts are issued, Simon XTi sounds alarm on sensor 39 Weather Alert

The alarm automatically clears 30 minutes after alert expires or can be cleared manually

1. Press the Red Alarm Banner then enter User Code to silence the alarm

Weather_Alert_01.jpg Weather_Alert_02.jpg

2. A scrolling banner appears on the bottom showing the severe weather alert

Weather_Alert_03.jpg

3. Press the bottom right GEAR icon then press DOWN ARROW button several times

Clear_Banner_01.jpg Clear_Banner_02.jpg 

4. Press the ENTER button by Programming then enter your Master Code

Clear_Banner_03.jpg Clear_Banner_04.jpg

3. Press INTERACTIVE SERVICES then CLEAR BANNER

Clear_Banner_05.jpg Clear_Banner_06.jpg

4. After clearing the banner press CLOSE several times to exit

Clear_Banner_08.jpg Clear_Banner_09.jpg

 

Program Duress Code

When Duress Code disarms the system, it sends a silent duress alarm to the Brinks Security

 1. Press the bottom right GEAR icon then press DOWN ARROW button several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter your Master Code then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press ACCESS CODES then press DOWN ARROW

Access_Codes_00.jpg Duress_Code_01.jpg

4.  Press Empty Box by Duress Code then enter new Duress Code then press SAVE to exit

Duress_Code_02.jpg Duress_Code_03.jpg

5. Press CLOSE several times to exit

Duress_Code_04.jpg Exit_Programming_01_Exit.jpg

Set Screen Brightness

 1. Press the bottom right GEAR icon then press DOWN ARROW button several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ARROW buttons to set brightness then press CLOSE to exit

 Brightness_01.jpg

Program Voice Chimes

Sounds tone and speaks when a door or window sensor is opened

 1. Press the bottom right GEAR icon then press DOWN ARROW button several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter the Installer Code 4321 then press OK

 Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press SIREN OPTIONS then press VOICE CHIME

Programming_-_Siren_Options_00.png Programming_-_Siren_Options_01.png

 4. Select chime sound then press SAVE then press CLOSE several times to exit

Programming_-_Siren_Options_03.png Programming_-_Siren_Options_04_Exit.png

 

Setting The Time and Date

1. Press the bottom right GEAR icon then press DOWN ARROW button several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER button by Set Date/Time then enter your Master Code

Time_Date_01.jpg Time_Date_02.jpg

3. Press HOURS then enter Hour 1 to 12 then press SAVE to exit

Time_Date_06_Set_Hours.jpg Time_Date_06_Set_Hours.jpg

4. Press MINUTES then enter Minutes 1 to 59 then press SAVE to exit

Time_Date_07_Set_Minutes.jpg Time_Date_07_Set_Minutes.jpg

5. Press to toggle AM or PM

Time_Date_08_AM_PM.jpg Time_Date_08_PM.jpg

6. Press MONTH then enter Month 1 to 12 then press SAVE to exit

Time_Date_09_Set_Month.jpg Time_Date_09a_Set_Month.jpg

7. Press DAY then enter Day 1 to 31 then press SAVE to exit

Time_Date_10_Set_Day.jpg Time_Date_10a_Set_Day.jpg

8. Press YEAR then enter Year 0000 to 9999 then press SAVE to exit

Time_Date_11_Set_Year.jpg Time_Date_11a_Set_Year.jpg

9. Press CLOSE to exit

Time_Date_12_Exit.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.