ADC-V622 Indoor Pan Tilt Camera Guide

Specifications

  • Digital pan tilt, camera lens takes very large image and pans around it
  • 1920 x 1080 pixel video resolution
  • 15' night vision range
  • Field of view 180° Horizontal and vertical
  • 2-Way Talk / Listen
  • Bluetooth connection to Smartphone, can act as an external speaker
  • WiFi 802.11 b/g/n
  • Ethernet connection
  • Operating Temperature 32° F to 104° F

ADC-V622_Pan_Tilt_Camera_Information.jpg

Default Camera

Warning! Erases everything, camera must be re-added to Alarm.com and WiFi configured

1. Press MENU button, camera says "Menu, use volume buttons to scroll through options"

ADC-V622_Pan_Tilt_Camera_Default_1.jpg

2. Press + button until "Factory Reset press the menu button to activate"

ADC-V622_Pan_Tilt_Camera_Default_2.jpg

3. Press top MENU button, camera says "Press menu button again to confirm factory reset"

ADC-V622_Pan_Tilt_Camera_Default_1.jpg

4. Press top MENU button again, camera says "Resetting"

  Setup WiFi - AP mode

1. Press top MENU button, camera says "Menu, use volume buttons to scroll through options"

ADC-V622_Pan_Tilt_Camera_Default_1.jpg

2. Press + button until "Access Point, press menu button to activate", press MENU button

ADC-V622_Pan_Tilt_Camera_Default_2.jpg ADC-V622_Pan_Tilt_Camera_Default_1.jpg

3. Front status light flashes blue

ADC-V622_Pan_Tilt_Camera_LED_Blue.jpg

4. Go to smartphone WiFi settings, look for ALARM xx:xx:xx then press CONNECT

  ADC-V622_AP_Setup_01.png ADC-V622_AP_Setup_02.png ADC-V622_AP_Setup_03.png

5. Open web browser, enter 192.168.1.1, camera menu appears, press SCAN

ADC-V622_AP_Setup_04.png ADC-V622_AP_Setup_05.png ADC-V622_AP_Setup_06.png

6. Swipe down then select WiFi network then swipe up

ADC-V622_AP_Setup_07.png ADC-V622_AP_Setup_08.png ADC-V622_AP_Setup_09.png

7. Enter WiFi encryption then press SUBMIT then OK. Camera beeps, green LED turns ON

ADC-V622_AP_Setup_10.png ADC-V622_AP_Setup_11.png ADC-V622_AP_Setup_12.png

 Setup WiFi - WPS mode

1. Press MENU button, camera says "Menu, use volume buttons to scroll through options"

ADC-V622_Pan_Tilt_Camera_Default_1.jpg

2. Press + button until "WPS press the menu button to activate", press MENU button

ADC-V622_Pan_Tilt_Camera_Default_2.jpg ADC-V622_Pan_Tilt_Camera_Default_1.jpg

 3. Camera says "WPS activated press any button to exit", front LED flashes blue

ADC-V622_Pan_Tilt_Camera_LED_Blue.jpg

4. Press and release router's WPS button or enable WPS mode in router programming

Router_WPS_Button.jpg

5. If successful after 1 minute the camera LED turns green

ADC-V622_Pan_Tilt_Camera_LED_Green.jpg

Hardwire Ethernet Connection to Router

ADC-V622_Pan_Tilt_Camera_Connect_To_Router.jpg

Add Camera to Account by Customer Website

1. Login on a laptop or home computer to Alarm.com customer website and press VIDEO

Alarm.com_Setup_01.png

2. Press SETTINGS

Alarm.com_Setup_02.png

3. Scroll to bottom of page and press ADD VIDEO DEVICE

Alarm.com_Setup_03.png

4. Camera should be detected, enter camera name then press INSTALL

Alarm.com_Setup_04.png

5. Alarm.com downloads information to the camera, this may take up to 5 minutes

Alarm.com_Setup_05.png

6. When complete press LIVE VIEW to view camera

Alarm.com_Setup_06.png

Add Camera to Account by Smartphone App

Note: Camera must already be connected to customer's router by Ethernet cable or by WiFi

1. Press top left Bars to access side menu then press VIDEO then press top right GEAR icon

ADC-V622_Setup_by_App_01.png ADC-V622_Setup_by_App_03.png ADC-V622_Setup_by_App_02.png

2. Press ADD VIDEO DEVICE then press INSTALL then enter camera name then NEXT

ADC-V622_Setup_by_App_04.png ADC-V622_Setup_by_App_05.png ADC-V622_Setup_by_App_06.png

3. When finished press X at top left to finish and exit

ADC-V622_Setup_by_App_07.pngADC-V622_Setup_by_App_08.pngADC-V622_Setup_by_App_09.png

 Troubleshooting

  • Power cycle the camera by unplugging and plugging in power adapter
  • Move closer to WiFi router
  • If issues persist, try resetting the camera to factory defaults

LED Reference Guide

  • Solid Green = Local network and Internet connection OK
  • Flashing Green = Local network connection OK, Internet connection bad
  • Solid Red = No local network or Internet connection
  • Flashing Red = Camera booting
  • Flashing Blue = Camera in WPS WiFi learn mode
  • Flashing White = Camera in WiFi AP learn mode
  • Flashing Yellow = Camera in Bluetooth Pairing mode
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.