ADC-V620PT Pan Tilt Camera - Installation Guide

This camera is discontinued but can still be added and viewed on an Alarm.com account

Specifications

  • 1280 x 800 pixel video resolution
  • 77° horizontal x 54° vertical field of view
  • 350° horizontal x 125° vertical pan tilt
  • WiFi 802.11 b/g/n
  • Ethernet connection
  • No night vision capability
  • Operating Temperature 32° F to 104° 

Factory Default

Warning! Erases everything, camera must be re-added to Alarm.com and WiFi configured

 Insert pin into side reset hole and hold button 15 seconds until LED flashes red and green

ADC-V620PT_Pan_Tilt_Camera_Factory_Default.jpg

WiFi Setup by WPS Enrollment Mode

1. Hold WPS button in back of camera base for 5 seconds until front LED flashes blue

ADC-V620PT_Pan_Tilt_Camera_WPS_Button.jpg

2. Press and release WPS button on router or enable WPS in router programming

Router_WPS_Button.jpg

2. Wait 2 minutes for the camera LED to turn solid green

ADC-V620PT_Green_LED.jpg

Hardwire Ethernet Connection to Router

Plug Ethernet cable into back of camera and into port in back of WiFi network router

ADC-V620PT_Pan_Tilt_Camera_Connect_To_Router.jpg

Add Camera to Account by Customer Website

Note: Camera must be connected to customer's router by Ethernet cable or by WiFi

1. Login to Alarm.com customer website and press VIDEO

01_Home_Page.png

2. Press SETTINGS

02_Video_Page.png

3. Scroll to bottom of page and press ADD VIDEO DEVICE

03_Video_Settings.png

4. Camera should be detected, enter camera name then press INSTALL

04_Add_V620PT_Camera_-_Camera_Found.png

5. Alarm.com downloads information to camera, this can take up to 5 minutes

05_Add_V620PT_Camera_-_Configuring.png

6. When complete press LIVE VIEW to view

06_Add_V620PT_Camera_-_Installation_Complete.png

7. To configure wireless press SETTINGS

07_Add_Camera_-_Live_View_Program_Wireless.png

8. Scroll down to the bottom of the page then press WIRELESS NETWORK

08_Add_Camera_-_Select_Wireless_Settings.png

9. Press SCAN to scan for networks

09_Add_Camera_-_Choose_Method.png

10. Select WiFi network from list

10_Add_Camera_-_Enter_Encryption.png

11. Enter WiFi encryption then press NEXT

10_Add_Camera_-_Found_Networks.png

12. Remove power to camera, unplug Ethernet cable then power up and wait 2 minutes

11_Add_V620PT_Camera_-_Wireless_Complete.png

Add Camera to Account by Smartphone App

Note: Camera must be connected to customer's router by WiFi or Ethernet Connection

1. Press top left 3 Bars for side menu then press VIDEO then press top right GEAR icon

ADC-V620PT_Setup_by_App_01.png ADC-V620PT_Setup_by_App_02.png ADC-V620PT_Setup_by_App_03.png

2. Press ADD VIDEO DEVICE press INSTALL  then enter new camera name then press NEXT

ADC-V620PT_Setup_by_App_04.png ADC-V620PT_Setup_by_App_05.png ADC-V620PT_Setup_by_App_06.png

3. When camera finishes configuring press X to exit

ADC-V620PT_Setup_by_App_07.png   ADC-V620PT_Setup_by_App_08.png ADC-V620PT_Setup_by_App_09.png

Troubleshooting

  • Power cycle the camera by unplugging and plugging in power adapter
  • Move closer to WiFi router
  • If issues persist, try resetting the camera to factory defaults

LED Reference Guide

  • All OFF = No power
  • Solid Green = Local network and Internet connection OK
  • Flashing Green = Local network connection OK, Internet connection bad
  • Solid Red = No local network or Internet connection
  • Flashing Red = Camera booting
  • Flashing Blue = Camera in WPS WiFi learn mode
  • Solid Blue = Privacy mode, press and release WPS button to exit
  • Flashing White = Camera in WiFi AP learn mode
  • Flashing Yellow = Camera in Bluetooth Pairing mode
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.