ADC-VC736 Outdoor Camera Guide

Specifications

  • 1920 x 1080 pixel video resolution
  • 86° vertical and horizontal field of view
  • 95' night vision range
  • SD Card slot (not functional at this time)
  • Ethernet connection only no WiFi
  • POE Power Over Ethernet compatible
  • Operating Temperature -22° F to 140° F

ADC-VC736_Bullet_Camera_Information.jpg

Factory Default

Hold reset button while powering up and continue holding for 10 seconds

ADC-VC736_Bullet_Camera_Factory_Default.jpg

Hardwire Connection to Customer's Router

ADC-VC736_Dome_Camera_Connection_To_Router.jpg

 Power Over Ethernet Connection to Router

ADC-VC736_Mini_Bullet_Camera_Ethernet_Connecto_to_Router.jpg

Add Camera to Account by Customer Website

1. Login on laptop or home computer to Alarm.com customer website and press VIDEO

01_Home_Page.png

2. Press SETTINGS

02_Video_Page.png

3. Press ADD VIDEO DEVICE

03_Video_Settings.png

4. Camera should be detected (if not default and try again) enter name and press INSTALL

04_Add_VC736_Mini_Bullet_Camera_-_Camera_Found.png

5. Alarm.com downloads information to the camera, this may take up to 5 minutes

05_Add_VC736_Mini_Bullet_Camera_-_Configuring.png

6. When complete press LIVE VIEW to view camera

06_Add_VC736_Mini_Bullet_Camera_-_Installation_Complete.png

Add Camera to Account by Smartphone App

1. Press 3 Bars at top left for side menu then press VIDEO then press GEAR icon

ADC-VC736_Setup_by_App_01.png ADC-VC736_Setup_by_App_02.png ADC-VC736_Setup_by_App_03.png

2. Press ADD VIDEO DEVICE then press INSTALL then enter name then press DONE

ADC-VC736_Setup_by_App_04.png ADC-VC736_Setup_by_App_05.png ADC-VC736_Setup_by_App_06.png

3. Camera may take several minutes to configure, press X at top left to exit

ADC-VC736_Setup_by_App_07.png ADC-VC736_Setup_by_App_09.png ADC-VC736_Setup_by_App_08.png

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section