ADC-V521IR Indoor Camera Guide

This camera is discontinued but can still be added and viewed on an account


  • 1920 x 1080 pixel video resolution
  • 802.11 b/g/n WiFi
  • Ethernet connection
  • 112° horizontal 100° vertical field of view
  • 20' Night vision range
  • 2-way audio
  • Operating Temperature 32°F to 104°F


Factory Default

Warning! Erases everything, camera must be re-added to and WiFi configured

Hold back button for 15 seconds, front LED flashes red and green if successful


WiFi Setup by WPS Mode

WPS enrollment mode is a quick way to connect your camera to your network router

1. Power up camera and wait for 2 minutes until camera LED turns red


2. Hold back button for 5 seconds then release, LED begins flashing blue


3. Press and release the WPS button on the router or enable WPS in router programming

4. Wait 2 minutes, camera LED turns green if successful or red if failure


WiFi Setup by Access Point

1. Hold back button 6 seconds until camera LED flashes white


2. Go to smartphone WiFi settings, look for ALARM xx:xx:xx then press CONNECT

  ADC-V622_AP_Setup_01.png ADC-V622_AP_Setup_02.png ADC-V622_AP_Setup_03.png

3. Open web browser, enter, camera menu appears, press SCAN

ADC-V622_AP_Setup_04.png ADC-V622_AP_Setup_05.png ADC-V622_AP_Setup_06.png

4. Swipe down then select WiFi network then swipe up

ADC-V622_AP_Setup_07.png ADC-V622_AP_Setup_08.png ADC-V622_AP_Setup_09.png

5. Enter WiFi encryption then press SUBMIT then OK. Camera beeps, green LED turns ON

ADC-V622_AP_Setup_10.png ADC-V622_AP_Setup_11.png ADC-V622_AP_Setup_12.png

Hardwire Connection to Router

Plug Micro cable adapter into camera then plug Ethernet cable into port on router


Add Camera using Customer Website

1. Login to customer website and press VIDEO




3. Scroll to bottom of page and press ADD VIDEO DEVICE


4. Camera should be detected enter camera name then press INSTALL


5. downloads information to camera, this may take up to 5 minutes


6. When complete press LIVE VIEW to view camera


Add Camera using Smartphone App

Note: Camera must be connected to customer's router by WiFi or Ethernet Connection

1. Press top left 3 Bars to access  side menu then press VIDEO then top right GEAR icon

ADC-V620PT_Setup_by_App_01.png ADC-V620PT_Setup_by_App_02.png ADC-V620PT_Setup_by_App_03.png

2. Press ADD VIDEO DEVICE then press INSTALL then enter camera name then NEXT

ADC-V620PT_Setup_by_App_04.png ADC-V620PT_Setup_by_App_05.png ADC-V620PT_Setup_by_App_06.png 

3. Camera may take several minutes to configure, press X at top left to exit

ADC-V620PT_Setup_by_App_07.png ADC-V620PT_Setup_by_App_08.png ADC-V620PT_Setup_by_App_09.png


  • Power cycle the camera by unplugging and plugging in power adapter
  • Move closer to WiFi router
  • If issues persist, try resetting the camera to factory defaults

LED Reference Guide

  • Solid Green = Local network and Internet connection OK
  • Flashing Green = Local network connection OK, Internet connection bad
  • Solid Red = No local network or Internet connection
  • Flashing Red = Camera booting
  • Flashing Blue = Camera in WPS WiFi learn mode
  • Flashing White = Camera in WiFi AP learn mode
  • Flashing Yellow = Camera in Bluetooth Pairing mode
Was this article helpful?
0 out of 0 found this helpful