ADC-V521IR Indoor Camera - Installation Guide

This camera is discontinued but can still be added and viewed on an Alarm.com account

The Basics

  • 1920 x 1080 pixel video resolution
  • 802.11 b/g/n WiFi
  • Ethernet connection
  • 112° horizontal 100° vertical field of view
  • 20' Night vision range
  • 2-way audio
  • Operating Temperature 32° F to 104° F

ADC-V521IR_Indoor_Camera_Information.jpg

Factory Default

Warning! Erases everything, camera must be re-added to Alarm.com and WiFi configured

Hold back button for 15 seconds, front LED flashes red and green if successful

  

WiFi Setup by WPS Enrollment Mode

WPS enrollment mode is a quick way to connect your camera to your network router

1. Power up camera and wait for 2 minutes until camera LED turns red

ADC-V521IR_Indoor_Camera_Red_Light.jpg

2. Hold back button for 5 seconds then release, LED begins flashing blue

ADC-V521IR_WPS_Button.jpg

3. Press and release the WPS button on the router or enable WPS in router programming

4. Wait 2 minutes, camera LED turns green if successful or red if failure

ADC-V521IR_Indoor_Camera_Green_Light.jpg

WiFi Setup by Access Point Mode

1. Hold back button 6 seconds until camera LED flashes white

ADC-V521_Camera_Back.jpg   

2. Go to smartphone WiFi settings, look for ALARM xx:xx:xx then press CONNECT

  ADC-V622_AP_Setup_01.png ADC-V622_AP_Setup_02.png ADC-V622_AP_Setup_03.png

3. Open web browser, enter 192.168.1.1, camera menu appears, press SCAN

ADC-V622_AP_Setup_04.png ADC-V622_AP_Setup_05.png ADC-V622_AP_Setup_06.png

4. Swipe down then select WiFi network then swipe up

ADC-V622_AP_Setup_07.png ADC-V622_AP_Setup_08.png ADC-V622_AP_Setup_09.png

5. Enter WiFi encryption then press SUBMIT then OK. Camera beeps, green LED turns ON

ADC-V622_AP_Setup_10.png ADC-V622_AP_Setup_11.png ADC-V622_AP_Setup_12.png

Hardwire Ethernet Connection to Router

Plug Micro cable adapter into camera then plug Ethernet cable into port on router

ADC-V521IR_Camera_Connect_To_Router.jpg

Add Camera to Account by Customer Website

1. Login to Alarm.com customer website and press VIDEO

Alarm.com_Setup_01.png

2. Press SETTINGS

Alarm.com_Setup_02.png

3. Scroll to bottom of page and press ADD VIDEO DEVICE

Alarm.com_Setup_03.png

4. Camera should be detected enter camera name then press INSTALL

Alarm.com_Setup_04.png

5. Alarm.com downloads information to camera, this may take up to 5 minutes

Alarm.com_Setup_05.png

6. When complete press LIVE VIEW to view camera

Alarm.com_Setup_06.png

Add Camera to Account by Smartphone App

Note: Camera must be connected to customer's router by WiFi or Ethernet Connection

1. Press top left 3 Bars to access  side menu then press VIDEO then top right GEAR icon

ADC-V620PT_Setup_by_App_01.png ADC-V620PT_Setup_by_App_02.png ADC-V620PT_Setup_by_App_03.png

2. Press ADD VIDEO DEVICE then press INSTALL then enter camera name then NEXT

ADC-V620PT_Setup_by_App_04.png ADC-V620PT_Setup_by_App_05.png ADC-V620PT_Setup_by_App_06.png 

3. Camera may take several minutes to configure, press X at top left to exit

ADC-V620PT_Setup_by_App_07.png ADC-V620PT_Setup_by_App_08.png ADC-V620PT_Setup_by_App_09.png

Troubleshooting

  • Power cycle the camera by unplugging and plugging in power adapter
  • Move closer to WiFi router
  • If issues persist, try resetting the camera to factory defaults

LED Reference Guide

  • Solid Green = Local network and Internet connection OK
  • Flashing Green = Local network connection OK, Internet connection bad
  • Solid Red = No local network or Internet connection
  • Flashing Red = Camera booting
  • Flashing Blue = Camera in WPS WiFi learn mode
  • Flashing White = Camera in WiFi AP learn mode
  • Flashing Yellow = Camera in Bluetooth Pairing mode
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.