1. Help Center
  2. 2GIG GC3
  3. GC3 Home Automation

GC3 - Add Z-Wave Door Lock

Avatar
Follow

1. Press SYSTEM SETTINGS then enter Installer Code 1561

Disarmed.jpg Enter_Code.png

 2. Press SMART HOME SETTINGS then ADD DEVICES

 Settings_Menu.png Add_Device_01.png

3. GC3 enters Z-Wave learn mode

Add_Device_02.png

Schlage Deadbolt
1. Enter 6-digit programming code provided in the Schlage documentation

2. Press SCHLAGE button then 0, The Schlage button flashes orange

hero_01.png

Kwikset Deadbolt
Open the battery cover and press left SmartCode button

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt
1. Touch screen with the back of your hand or fingers to activate

2. Enter 4 to 8-digit Master Code then press #, lock should sound Happy tone

3. Press 7 then # to learn, lock should sound Happy tone

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

 4. Learning may take up to 1 minute, when finished press OK

Add_Device_03.png Add_Device_04.png

5. Press RENAME then enter light module name then press DONE

Add_Device_05.png Add_Device_06.png

6. Press GC3_Back_Arrow.png or the HOME button to exit

Add_Device_07.png GC3_Home_Button_2.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section