ADC-700X Outdoor Camera Guide

This camera is discontinued but can still be added and viewed on Alarm.com account

Specifications

• 640 x 480 pixel video resolution
• 40 feet night vision range
• Field of view 56° Horizontal 42° Vertical
• Ethernet connection only no WiFi
• Supports POE Power Over Ethernet
• Operating Temperature -4°F to 122°F

Factory Default

1. Remove wiring cover and rubber insert then carefully unscrew back of camera

2. Hold reset button for 90 seconds until LED flashes red

Hardwire  Connection to Router

Connect Ethernet cable from camera to unused port on network router

Power over Ethernet to Router

Add Camera using Customer Website

1. Login on laptop or home computer to Alarm.com customer website and press VIDEO

2. Press SETTINGS

3. Scroll to bottom of page and press ADD VIDEO DEVICE

4. Camera should be detected (if not default and try again) enter name and press INSTALL

5. Alarm.com downloads information to the camera, this may take up to 5 minutes

6. When complete press LIVE VIEW to view camera

Add Camera using Smartphone App

1. Press 3 Bars at top left for side menu then press VIDEO then press GEAR icon

2. Press ADD VIDEO DEVICE then press INSTALL then enter name then press DONE

3. Camera may take several minutes to configure, press X at top left to exit