GC2 GoControl - Motion Detector Batteries

2GIG Motion Detector

1. Remove bottom screw then pull front from base plate

2GIG_Motion_Detector_Battery_Replacement_1.jpg

2. Remove and replace CR123A 3-Volt Lithium Battery

2GIG_Motion_Detector_Battery_Replacement_2.jpg 

Line.jpg

Honeywell Motion Detectors

Twist screwdriver in bottom slot to remove front, batteries are 2 CR123A Lithiums

Honeywell_5890_Motion_Detector_Batteries.jpg

Line.jpg

Remove screw and press bottom tab to remove front, battery is CR123A Lithium

 

Honeywell_5800PIR_Motion_Detector.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.