Lynx Touch - Bypass Sensors

Temporarily disables some sensors from arming while arming all other sensors

All bypasses are removed when system is disarmed

Select from Sensor from List

1. Press SECURITY then ZONES

Bypass_01_Main.jpg Bypass_02_Security.jpg

2. Press SELECT ALL to view all sensors then select sensor then press BYPASS button

Bypass_03_Zones_List_All.jpg Bypass_04_Zones_Sensor_Selected.jpg

3. Enter User Code then press BACK ARROW to exit

Bypass_05_Enter_Code.jpg Bypass_06_Zone_Bypassed.jpg

4. Press ARM AWAY or ARM STAY then enter User Code to arm

Bypass_07_Security.jpg Bypass_08_Enter_Code.jpg

Bypass Open Sensors

1. Press SECURITY then ZONES

Bypass_Faulted_10_Main.jpg Bypass_Faulted_11_Security.jpg

2. If one sensor press to select then press BYPASS button

Bypass_Faulted_12_Faulted_Zones.jpg Bypass_Faulted_13_Select_Faulted_Zone.jpg

3. If more than one sensor press BYPASS ALL FAULTED button

Bypass_faulted_12a_2_Faulted_Zones.jpg

4. Enter User Code then press BACK ARROW to exit

Bypass_Faulted_14_Enter_Code.jpg Bypass_Faulted_15_No_Items_to_Display.jpg

5. Press ARM AWAY or ARM STAY then enter User Code to arm

Bypass_07_Security.jpg Bypass_08_Enter_Code.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.