GC2 GoControl - Sensor and System Test

1. Press SECURITY then MENU

User_Menu_-_Bypass_01.png User_Menu_-_Alarm_History_01.png

2. Press TOOLBOX then enter the Master Code

User_Menu_-_Alarm_History_02.png User_Menu_-_Alarm_History_03.png

2. Press SYSTEM TEST, GoControl enters test mode

User_Menu_-_System_Test_00.png User_Menu_-_System_Test_01.png

3. Activate all door and window sensors, walk past motion, press smoke test button

 Open_Close_Door.jpg  White_Open_Window.jpg   Motion_Detector_Test.jpg

3. GoControl displays sensor and beeps 1 to 8 times for signal strength, press OK for next

                1 to 4 beeps = poor, 5 to 6 = good, 7 to 8 = excellent  

User_Menu_-_System_Test_02.png User_Menu_-_System_Test_07.png

4. GoControl tests console button colors, press YES or NO to continue

User_Menu_-_System_Test_04.png User_Menu_-_System_Test_05.png

5. Press YES or NO at the Speaker Test then press OK or HOME button to exit

User_Menu_-_System_Test_09.png User_Menu_-_System_Test_07.png

Was this article helpful?
0 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.