Concord - Add Z-Wave Device

This requires an Alarm.com cellular communication module

Hold Z-Wave button on cellular daughter-board until L2 LED flashes 4-blink pattern

Z-Wave_Learn.jpg

 GE Jasco Lamp Appliance Module

Double click the Mate button

Z-Wave_Mate_Button_2.jpg

FortrezZ Indoor Siren

Bring siren within 6 feet of Concord then press Program Switch 2 times to learn

FortrezZ_SSA1.jpg

Everspring SE812 Indoor Siren

Bring siren within 6 feet of Concord then press Link button 3 times to learn

Everspring_SE812_Siren_Strobe.jpg

GE Jasco Wall Dimmer Light Switch

Turn the light switch on and off

Picture4.png

GE Jasco Wall AC Outlet

Double click the button in the middle of the outlet

final_nueve.jpg

Schlage Deadbolt Door Lock

1. Enter 6-digit programming code provided in the Schlage documentation

2. Press SCHLAGE button then 0, The Schlage button flashes orange

hero_01.png

Kwikset Deadbolt Door Lock

Open the battery cover and press left SmartCode button

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt

1. Touch screen with the back of your hand or fingers to activate

2. Enter 4 to 8-digit Master Code then press #, lock should sound Happy tone

3. Press 7 then # to learn, lock should sound Happy tone

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

Alarm.com ADC-T2000 Thermostat

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold DOWN ARROW until Radio Wave Icon appears below temperature display 

T2000_Setup_03.jpg

Alarm.com ADC-T3000 Thermostat

1. Press MENU button to display Menu then press DOWN ARROW until SETTINGS

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2.  Press ENTER button to select then press DOWN ARROW until NETWORK 

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press ENTER button to select then press UP or DOWN ARROW to highlight ADD

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press ENTER button to select and start Z-Wave learn mode

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit

Alarm.com_ADC-T3000_Learn_07.jpg

GE Basic Thermostat

Remove top cover then press the MATE button

Radio_Thermostat_CT20.jpg

Radio Thermostat CT30, CT100 and CT101 Thermostat

Interlogix_13-CT32_Thermostat_Front_3.jpg

1. Press thermostat MENU button, r1 displays and MATE appears under antenna icon

Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg

2. Press MATE button again, MATE begins flashing

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes__1_.jpg

3. If successful thermostat displays LINK under antenna icon, press MENU button to exit

Radio_Thermostat_CT100_Learn_03_Mate_Flashes__2_.jpg

Radio Thermostat CT110 Thermostat

Press left side Antenna button

Radio_Thermostat_CT110.jpg

 GoControl RCS Technologies TBZ-48 Thermostat

1. Hold FAN button 5 seconds until SETUP appears then UP ARROW button until ZWAVE

GoControl_Thermostat_Learn_01.jpgGoControl_Thermostat_Learn_02.jpg

2. Press MODE button to select then press MODE button again to learn

GoControl_Thermostat_Learn_03.jpgGoControl_Thermostat_Learn_04.jpg

3. If successful press FAN button to exit, antenna icon appears by temperature display

GoControl_Thermostat_Learn_05.jpgGoControl_Thermostat_Learn_06.jpg

Trane Thermostat

TZEMT400BB32MAA_Front_1.jpg

1. Press MENU button then Scroll Down button to Z-WAVE INSTALL and press SELECT 

Trane_TZ45_Learn_01.png Trane_TZ45_Learn_02.png

2. Press Scroll Up button for YES to begin Z-Wave enrollment

Trane_TZ45_Learn_03.png Trane_TZ45_Learn_04.png

3. If successful returns to main menu, press Done button to exit

Trane_TZ45_Learn_05.png 

If successful Concord keypad beeps and L2 LED turns ON for 1 minute

mceclip0.png

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.