Lynx Touch - Delete Z-Wave Device

1. Press AUTOMATION then TOOLS

Ready_To_Arm.jpg Tools_00.jpg

2. Press EXCLUDE DEVICES then enable Z-Wave delete mode on device

Tools_Delete_00.jpg Tools_Delete_01.jpg

GE Jasco Light Appliance Module

Double click  MATE / LEARN button

Picture2.png

 

Line.jpg

GE Jasco Wall Dimmer Lght Switch

Turn on and off light switch.

Picture4.png

Line.jpg

GE Jasco Wall AC Outlet

Double click button in middle of outlet.

Picture3.png

Line.jpg

Schlage Lever Lock or Deadbolt

1. Enter 6-digit programming code provided in documentation from Schlage

2. Press Schlage logo or button then press 0

Door_Lock_19.jpg

Line.jpg

Kwikset Deadbolt

Open battery cover, press left SmartCode button

Picture5.png

Line.jpg

Yale Touchscreen Deadbolt

1. Touch screen with the back of your hand or fingers to activate

2. Enter 4-8 digit Master PIN Code then press Gear_Icon.jpg

3. Press 7 then Gear_Icon.jpg

4. Press 3 then Gear_Icon.jpg

Door_Lock_10.jpg

Line.jpg

 

Alarm.com ADC-T2000 Thermostat

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold DOWN ARROW until Radio Wave Icon disappears temperature display 

T2000_Setup_03.jpg

Line.jpg

 

Honeywell T6 Thermostat

Honeywell_T6_Thermostat.jpg

 

Line.jpg

 

Radio Thermostat CT-20 and GE Thermostat
Pull top cover toward you to remove then press MATE button to learn

Radio_Thermostat_CT20_Learn_2.jpg

Line.jpg

Radio Thermostat CT30, CT100, CT101

Radio_Thermostat_CT30_Front.jpg

1. At thermostat press MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_01.jpg Radio_Thermostat_CT100_02.jpg

2. Press MATE, which begins flashing, if successful LINK disappears, press MENU to exit

Radio_Thermostat_CT100_04.jpg Radio_Thermostat_CT100_01.jpg

Line.jpg

Radio Thermostat CT110

Press left side Antenna button

Radio_Thermostat_CT110.jpg

 

Line.jpg

Linear GoControl Garage Door Controller

Press the side MATE button, controller flashes then sounds 1 beep then 3 beeps 

Garage_Door_10_Linear_Mate_Button.jpg

3. If successful Lynx Touch beeps, press BACK ARROW or the HOME button to exit

Tools_Delete_02.jpg Lynx_Touch_L5210_Home_Button.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.