Qolsys IQ Panel 2 - Programming a Motion Detector

1. Swipe down from the clock display at the top of the screen then press Settings

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Installation_Screen.png 6.png

4. Press SECURITY SENSORS then AUTO LEARN SENSORS

7.png 8.png

5. Depending on motion detector press the top or bottom tab to remove cover to learn

QS1230_Remove_Cover.jpg

60-807_Motion_Detector_Remove_Cover.jpg

6. Press OK to confirm

 Auto_Learn_Confirm.png

7. Enter sensor information then press ADD NEW to save then HOME to exit

11.png Z-Wave_Add_09_Exit.jpg

  • Sensor DL ID: Don't touch this option
  • Sensor Type: Select “Motion Detector”
  • Sensor Name: Select an appropriate name or create a "Custom Description"
  • Chime Type: This allows you to apply a specific sound to your device
  • Sensor Group: Set this to "17" 
  • Voice Prompts: Leave this alone
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.