Identify the Ecolink Motion Detector
Uninstall the Ecolink Motion Detector
Follow the steps below to remove the Ecolink motion detector:
- Place System on Test (Follow this link for instructions.)
- Locate your existing motion detector and remove carefully from your wall
Delete the Ecolink Motion Detector
Follow the steps below to delete the recalled motion from programming:
- Swipe down the clock display for Settings Menu then press SETTINGS
- Enter Installer Code 1111 then press then ADVANCED SETTINGS
- Press INSTALLATION then DEVICES
- Press SECURITY SENSORS then DELETE SENSORS
- Select a sensor by adding a checkmark then press DELETE then press OK to confirm
- Press HOME to exit programming
Install the New Motion Detector
Pro Tip: The coverage area is 20 feet
Pro Tip: The detector must be 7-8 feet from the floor in the corner of the room
Follow the steps below to install and mount your new motion detector:
- Clean and dry the wall (and your hands) before mounting the device
- Remove tape backing and apply pressure against the wall for 10 seconds
Programming the New Motion Detector
Follow the steps below to program a new motion detector into your system:
- Swipe down from the clock display at the top of the screen then press SETTINGS
- Press ADVANCED SETTINGS then enter the Installer Code 1111
- Press INSTALLATION then DEVICES
- Press SECURITY SENSORS then AUTO LEARN SENSORS
- Depending on the motion detector press the TOP or BOTTOM tab to remove the cover to learn
- Press OK to confirm
- Enter sensor information then press ADD NEW to save then HOME to exit
Sensor DL ID: Don’t touch this option
Sensor Type: Select “Motion Detector”
Sensor Name: Select an appropriate name or create a “Custom Description”
Chime Type: This allows you to apply a specific sound to your device
Sensor Group: Set this to “17”
Voice Prompts: Leave this alone
Returning Ecolink Motion Detector
Once you have successfully installed your new motion detectors, please return all Ecolink motion detectors to us at your earliest convenience to the following address:
Brinks Home Security
Attn: Parts Return
616 W. Bertrand Ave
St. Marys, KS 66536