IQ Panel 2 - Remove Z-Wave Device

The below steps will walk you through removing an existing Z-Wave device from the IQ panel 2. Please note that some Z-Wave devices require 24 hours to update before they can be added after being removed.

 

1. Swipe down from the top clock display for Settings Tray, press SETTINGS for User Menu, then ADVANCED SETTINGS

001_image.png

 

2. Enter Installer Code 1111 or Dealer Code 2222, press INSTALLATION then DEVICES
002_image.png

 

3. Press Z-WAVE DEVICES then CLEAR DEVICE
003_image.png

 

4. Press the Mate or Learn button on the device, press OK and then HOME to exit

004_image.png

Was this article helpful?
0 out of 0 found this helpful