The below steps will walk you through removing an existing Z-Wave device from the Simon XTi panel. Please note that some Z-Wave devices require 24 hours to update before they can be added after being removed.

 

  1. From the home screen, press the gear icon in the lower right corner of the screenb001_image.png
  2. Press the down arrow on the right side of the screen until you see PROGRAMMING, then select ENTER
  3. Enter the four-digit Installer Code 4321, then OK
  4. Press INTERACTIVE SERVICES, then Z-WAVE, then press REMOVE DEVICEb002_image.png
  5. Activate the inclusion function on the Z-Wave device. This process will vary between different Z-Wave devices. Some Z-Wave devices will have a button for this purpose, while others may require a specific code to be entered on the device. Check the device manual for more information. You may need to bring the Z-Wave device close to the panel in order to complete the process. Once successful, the message DEVICE DELETED will be displayed.
  6. Keep pressing the CLOSE button in the upper-right corner until you are returned to the home screen. Any programming changes that were made will automatically be saved.
Was this article helpful?
0 out of 0 found this helpful