Find the image of your key fob below to view instructions on how to complete your battery replacement.
Interlogix / GE Security TX-4012 / TX-4014 / TX-4015 Key Fobs:
Insert a coin into the slot shown below, and twist to open it.
Slide the CR2032 3-Volt Lithium battery out to remove and replace with the + side face up.
Interlogix / GE / ITI 60-606 / 60-607 Key Fob:
Remove the screw and pry open the cover as shown below.
Remove and replace GP23A 12-Volt Lithium battery.
Interlogix WST-102 Wireless Sensor 4-Button, 345Mhz, Chrome-Plated Key Fob:
With a key or small screwdriver, push up on the black tab located at the bottom of the key fob and slide the chrome trim off.
Carefully separate the front and back piece of plastic to reveal the battery.
Remove and replace CR2032 battery with the + side face up.
Reassemble the plastic pieces, ensuring they click back together.
Ensure the notch in the chrome trim is aligned with the back of the plastic.