IQ Panel 2 - Add a Kwikset Door Lock

1. Press or swipe down the clock display at the top for the Settings Tray. Press SETTINGS for User Menu, then select ADVANCED SETTINGS.

15.1.1a_Enter_Program_01_275x155.jpg  15.1.2a_Enter_Program_02_275x155.jpg  15.1.3a_Enter_Program_03_275x155.jpg

 

2. Enter the Installer Code (1111) or the Dealer Code (2222) to access the Installer Programming Menu. Press INSTALLATION, then DEVICES.

15.2.1a_Enter_Program_04_275x155.jpg  15.2.2a_Z-Wave_01_Installer_Menu_275x155.jpg  15.2.3a_Z-Wave_02_Devices_275x155.jpg

 

3. Press Z-WAVE DEVICES, then select ADD DEVICE. Press PAIR to begin the learning process.
Note: If you experience trouble with the system learning, try the clear device option. Select "clear device", then press the learn button on the device. If the clear is successful, try to re-add.

15.3.1a_Z-Wave_03_275x155.jpg  15.3.2a_Z-Wave_Add_00_Main_275x155.jpg  15.3.3a_Z-Wave_Add_01_Main_275x155.jpg

 

4. Press the leftmost learn button under the battery cover.

15.4.1a_Z-Wave_Add_02_Searching_275x155.jpg  15.4.2a_Z-Wave_Kwikset_Lock_Add_01_275x155.jpg  15.4.3a_Z-Wave_Kwikset_Lock_Add_01a_275x155.jpg

 

5. Press NAME, enter the pre-determined name or select CUSTOM NAME to choose your own name, up to 10 characters.

15.5.1a_Z-Wave_Kwikset_Lock_Add_02_Learned_275x155.jpg  15.5.2a_Z-Wave_Thermostat_Add_05_Name_275x155.jpg

 

6. Press CHECK or the KEYBOARD icon, select ADD to finish, then HOME to exit.

15.6.1a_Z-Wave_Thermostat_Add_07_Custom_Name_02_275x155.jpg  15.6.2a_Z-Wave_Kwikset_Lock_Add_05_Add_275x155.jpg  15.6.3a_Z-Wave_Add_09_Exit_275x155.jpg

Was this article helpful?
0 out of 0 found this helpful