How to add sensors to the IQ Panel 4

Add Sensors

1. Swipe down from the time display to open the Settings drop-down, then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

 

2. Press ADVANCED SETTINGS, then enter your Installer Code (1111, 2222)

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

 

3. Select Installation, then Devices and Security Sensors

003_sensor_iq4.png

 

4. Select “Add Sensor”

mceclip0.png

5. Select the appropriate source based on the frequency of the device being manually learned in


6. Enter each of the following:

  • • DL code or Sensor ID on the back of the device and touch “Done”
  • • Sensor Type from the list
  • • Sensor Group from the list
  • • Sensor Name from the list or create a “Custom Name” using the built-in keyboard with Custom Text to Speech.
  • • Chime Type from the list
  • • Voice Prompts on or off

7. Click “Add New” to save the information and complete the process

007.png

 

Auto Learn Sensors

1. Swipe down from the time display to open the Settings drop-down, then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

 

2. Press ADVANCED SETTINGS, then enter your Installer Code (1111, 2222)

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

 

3. Select Installation, then Devices and Security Sensors

003_sensor_iq4.png

 

4. Select “Auto Learn Sensor”

mceclip1.png

 

5.  Open/Close or Tamper a sensor to enroll. For PowerG contacts, hold the "enroll" button until the yellow LED flashes.

 

6. Panel will chime and display the sensor's DL code. Select OK to confirm.

 

7. Configure the Partition Name, Sensor Type, Sensor Group, Sensor Name, Chime Type, and Voice Prompts with the smart filtering drop-down lists.

 

8. Click “Add New” to save the information and complete the process.

007.png

Was this article helpful?
0 out of 0 found this helpful