How to replace the backup battery for the 2GIG Edge

Please follow the steps below to replace the 2GIG Edge backup battery:


1. Disconnect the transformer from the power outlet. Remove the four screws that secure the back panel, then carefully remove the back cover from the panel.



2. Carefully detach the power cable from the battery to be replaced



3. Carefully detach the battery from the panel


Note: You may need to apply a reasonable amount of force to separate the battery from the adhesive that holds it in place.


4. Peel off the adhesive strip from the back of the new battery


5. Insert the new battery and attach the power cable



6. Replace the back cover




Was this article helpful?
0 out of 0 found this helpful