Connecting Interlogix TX-E201 Door/Window Sensor to the IQ Panel 2

Please follow the steps below to connect your wireless Interlogix TX-E201 door/window sensor to the IQ Panel 2. 

 

1. Swipe down from the clock display at the top of the screen, then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

 

2. Press ADVANCED SETTINGS, then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

 

3. Press INSTALLATION, then DEVICES

Installation_Screen.png 6.png

 

4. Press SECURITY SENSORS, then AUTO LEARN SENSORS

7.png 8.png

 

5. Open the sensor cover to learn, then press OK to confirm

 Auto_Learn_Confirm.png

 

6. Enter sensor settings, press ADD NEW to save, then HOME to exit

11.png Auto_Learn_Sensor_12_Exit.jpg

  • Sensor DL ID: Don't touch this option
  • Sensor Type: Select “Door/Window”
  • Sensor Name: Select an appropriate name or create a "Custom Description"
  • Chime Type: This allows you to apply a specific sound to your device when it’s used
  • Sensor Group: Choose “10” for an entry delay or “13” for instant  
  • Voice Prompts: This allows you to turn on or off the vocal chime



Was this article helpful?
0 out of 0 found this helpful