This is a VISTA-20ip with a 6160RF keypad. I do not have any wireless devices at this time. The keypad seems to be working OK but I am getting the message "CHECK 100 RF RECEIVER". How should the system / keypad be setup to fix this error? Thanks,
You will need to disable any wireless settings in programming. The most common culprit is the programming in *24 HOUSE ID. If you have a value in here, the panel thinks its supposed to look for wireless devices and if it cant see a receiver it will throw this error. Make sure that the wireless receiver is not enabled in the 6160RF Keypad. See below.
For more programming help on the Vista 20P/21IP click here.
Comments
Hi Brian,
You will need to disable any wireless settings in programming. The most common culprit is the programming in *24 HOUSE ID. If you have a value in here, the panel thinks its supposed to look for wireless devices and if it cant see a receiver it will throw this error. Make sure that the wireless receiver is not enabled in the 6160RF Keypad. See below.
For more programming help on the Vista 20P/21IP click here.
Please sign in to leave a comment.