Avatar

Brinks Home Security

  • Total activity 867
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 3 users
  • Votes 110
  • Subscriptions 275

Activity overview

Latest activity by Brinks Home Security
  • Avatar

    Brinks Home Security created an article,

    Installing The TG1 Express

    This guide is not intended to replace the existing installation manuals provided by the manufacturers of the hardware. This guide is only a supplement to the manufacturer instructions, warnings, se...

  • Avatar

    Brinks Home Security commented,

    Thank You to everyone for their patience!  We have the video running now and appreciate your business.    Sincerely, LiveWatch Security

  • Avatar

    Brinks Home Security commented,

    Good Afternoon Aaron, I apologize for the issues you are having in reaching our support team, it is certainly not the way we do things. For security measures, we did change your installer code from...

  • Avatar

    Brinks Home Security created an article,

    Clearing the Low Battery Message on an IQ Gen 2

    Unfortunately, the only way to clear a low battery message on the IQ Gen 2 is to physically open the panel and replace the backup battery. Due to our policies, we do NOT condone replacing the backu...

  • Avatar

    Brinks Home Security created an article,

    My Installer Code

    What is my Installer Code? The Installer Code is used for accessing advanced settings on your control panel. This code isn't the same as your Master Code and can't be used for arming and disarming ...

  • Avatar

    Brinks Home Security created an article,

    Programming Carbon Monoxide Detector for IQ Gen 2

     1. Start by swiping down the Gray Rectangle Bar above time. 2. Press "Settings".  3. Press "Advanced Settings".   4. Enter Installer Code (Press "1111") *Note: If ...

  • Avatar

    Brinks Home Security created an article,

    Arming & Disarming IQ Panel Gen 2

      Arming Overview To Arm the System: (Using Arm Stay) 1. Press "Lock Button" 2. Press "Arm Stay"  3. Once Arm Stay has been pressed, you have a 45 second exit delay (Default ...

  • Avatar

    Brinks Home Security commented,

    Good Morning!   Setting up system notifications is quick and simple. If the service plan you selected is Total Home, alarm.com will have notification options for most system events. Once logged int...

  • Avatar

    Brinks Home Security created an article,

    IQ Gen 2 Cellular Test

    The purpose for performing a "Cellular Test" is to see if your panel is successfully communicating with our monitoring stations. Follow the instructions below...   Select the line at the ...

  • Avatar

    Brinks Home Security commented,

    Official comment

    @srini  You will first want to delete any zones that are utilizing slots for wireless sensors. You were on the right track in deleting zones 13 and 14. On the Vista 20P zones 9 on up are wireless. ...